Datacom Systems 10/100-AT
Single Channel 10/100 Ethernet Tap
Datacom Systems Products
Datacom Systems Network Taps
The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity with "no break the link" design. Network performance will not be affected by power loss.
- Eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed
- Non-intrusive, fault-tolerant, invisible to the network
- Redundant power supply insures seamless monitoring even if the main power source is unavailable
- Never lose packets from power failure - industry-leading "no break the link" design guarantees network traffic will continue to flow uninterrupted
- View all traffic on both sides of full duplex links
- Reduces degradation of switch performance due to port mirroring
- View Layer 1 and 2 errors such as runts and CRC errors
- Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U).
- Passes all pairs
- Supports Power over Ethernet (PoE)
Technical Specifications:
| Model | 10/100-AT |
|---|---|
| Network Connections | 10/100 Tap (RJ45) |
| Monitoring Connections | 10/100 (RJ45) |
| Power | Two (2) External AC Adapters (included) Input: 100-240 VAC, 50-60Hz, 0.8A |
| Dimensions (H x W x D) | 1.07 X 5 X 5 in (2.7 X 12.7 X 12.7 cm) |
| Weight | 8 oz. (.23Kgs) |
| Operating Temperature | 32º to 104ºF (0° to 40° C) |
| Storage Temperature | -22º to 149ºF (-30° to 65° C) |
| Humidity | 5 to 90% non-condensing |
| Certifications |
|
| Warranty | Two (2) Years Standard Warranty |
| Optional Rack Mount | RMC-3 |
Documentation:
Download the Datacom Sysems 10/100-AT Datasheet (.PDF)